PACKAGE: JLT COLD AIR INTAKE/SCT X-4 TUNER (2011-14 MUSTANG GT)

FREE SHIPPING

Package includes: JLT Series 2 Black Textured Plastic Cold Air Intake Kit, SCT Power Flash X-4 Tuner #7015) loaded with custom JLT tune calibrated for the JLT Intake, JLT T-Shirt, and FREE Standard Shipping within Continental US.

ALL NEW JLT SERIES 2 for 2011-2014 Mustang GT 5.0 and 2012-2013 Boss 302

This new kit was designed from the ground up to work with today's aftermarket manifolds and throttle bodies.

Released back in 2010, our original kit has worked great on the 5.0 for over 7 years. With the release of the BOSS and now the Holly Sniper along with 85 and 90mm throttle bodies we decided to do a redesign to accommodate these different sizes and angles.

The all new JLT Series 2!
BIGGER, BADDER and still the BEST!

Designed to fit and work with the stock manifold as well as the BOSS and Holley Sniper

It starts with a 4" opening at the throttle body to match up to those 90mm units. The kit comes COMPLETE with 2 couplers. One 4" straight for the 90mm and a 4-3.5" reducer for the stock unit.

Next is the perfect 112mm MAF housing. Up from 107mm on the original, but not so big to cause drivability issues. Oh and the MAX allowed in NMRA Coyote Stock racing.

At the MAF you attach our one off designed S&B filter. A massive 5" at the inlet with a full radiused bellmouth to huge 1" deep pleats, this thing flows tons of air.

Finally all this sits in our own designed Roto Molded heat shield that utilities the factory fresh air inlet to get you the most cool air possible.

Finish it off with a silicone coupler and stainless clamps and you got the BEST Intake on the market!!! NO METAL TUBING HERE!!

MOLDED IN MAF
It’s a full 112mm ID at the MAF area
MAF is rotated to the inside or engine side of the tube for a more pleasing smooth look

HEAT SHIELD
Includes new roto molded plastic heat shield to block engine heat at idle and low speed. 
It incorporates the fresh air inlet from the grill. 
It uses a large area to make sure the filter has tons of cool air.

FINISH OPTIONS
Standard finish is an OEM looking black textured plastic.

KIT INCLUDES:
• JLT Intake Tube with Black Textured finish
• 4" Silicone Coupler for aftermarket throttle bodies
• 4-3.5" Silicone reducer for stock throttle bodies
• 5x7" S&B Powerstack Air Filter
• Roto molded Heat Shield
• SCT X4 Tuner preloaded with a custom tune file.
• HD Clamps, 2013-14 hood insert plug & all needed hardware

AUTOMATIC OWNERS
Automatic cars need an additional fitting, which we provide if you select automatic when ordering (see below). All you need to do is drill a ½” hole (we show you where) in the tube, install the supplied grommet, fitting and you’re done. Note, all kits sold to resellers will include the automatic fitting.

EASY INSTALL
The new design, detailed instructions and online video instructions helps make this an easy install (see Instructions & Videos tabs to download / view).

AIR FILTER OPTIONS - OIL OR DRY
We use only the best air filters made by S&B to our specifications. 
For years we only used oiled filters, but dry filter technology has been proven and is now a popular option.

Should I choose a Dry Disposable or Cotton Oiled Filter?
Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.

Dry: Comparable airflow to oiled cotton filters with the same great protection.
Last for up to 30,000 miles of highway driving. Extend the life of the filter using compressed air.

Oil: Oiled filters can last forever as long as you properly clean and re-oil it. 
See picture of filters below. Oil filters are available in red or blue and Dry filters are white.

MAINTENANCE 
To properly clean your oil filter, we recommend the S&B Precision II Cleaning & Oiling Kit. 
*TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again.

JLT Pre-Filters are now available for most intake kits we carry, these filters are made for us by Outerwears, these prefilters are water repellent. They will increase your filter life and cut down on your cleaning intervals! For more information check the product page here JLT Air Filter PRE FILTER

TUNER:
Click here for SCT X-4 Tuner details

TUNING:
With this package you get a custom 91 or 93 tune that has been tested and proven by us. We support your car with any needed tune adjustments for 1 year from the date of purchase covering modifications such as headers and off road exhaust. Skip shift can be removed in our tunes.

GAINS AND TESTING:
Up to 30+ RWHP has been seen when used with our custom tune!
Our testing as well as many others have showed gains of 24-30 RWHP with our CAI and custom tune. If you see more “claimed” by others, ask them how. Also look over the dyno sheets real good for low number baseline runs or no dyno sheets at all. Many will base line the car with 87 fuel, then add 93 fuel, the CAI and tune and show more power. We don't do that! We test a car with 93 fuel from the start.

Please be sure to carefully make all required selections below. 
The computer code on 2011-2014 Mustangs is under the hood on the passenger side located on a silver rectangular box. Code is 3 letters ending with a number. Click here for picture

Watch us on Speed channels Two Guys Garage
JLT TWO GUYS GARAGE SPOT

2013 owners:, As of Nov. 2012 ALL JLT KITS INCLUDE OUR WATER BLOCKER PLUG INSERT FOR NO WORRIES ABOUT WATER GETTING TO THE FILTER.

*This product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.