PMAS Velocity Cold Air Intake; Tune Required (15-17 GT)
More Air For More Power. Improve the power and performance of your Coyote powered S550 Mustang by replacing the restrictive factory intake with a PMAS Velocity Cold Air Intake. The stock air intake was not designed for the demands of a high performance muscle car, it was manufactured to meet the basic requirements of a mass produced commuter vehicle. It is just for this reason that PMAS engineered their Tune Required Velocity Intake to greatly improve air flow, when compared to stock, for a significant boost in rear wheel horsepower and torque. As an added bonus you will also experience a noticeable increase in idle, throttle response and over all engine performance.
Calibration Required. Installation of this PMAS Velocity Cold Air Intake will require the use of a Handheld Tuner to reprogram the vehicles computer (ECU) for operation. By reprogramming your Mustangs ECU you will be able to realize the full power potential that this Cold Air Intake has to offer.
Unique Design. Designed with maximum flow as the first priority, this PMAS Velocity Air Intake was engineered with computational fluid dynamic “CFD” data for minimum restrictions. Featuring a patented mass air flow sensing system, this Cold Air Intake effectively uses a massive 120mm intake tube with no MAF resolution loss. The unique Velocity Stack inlet design maximizes airflow without turbulence for smooth, stable idle air flow which results in stock drivability.
Reusable S&B Air Filter. The included high flow S&B Filter effectively filters out power robbing contaminants with its multi layer design. S&B Air Filters are made up of eight layers of specially treated cotton media that are mounted between two epoxy-coated wire screens. The red oil used to treat the cotton layers creates a sticky surface to capture harmful microscopic particles before they can enter your Mustang's engine. Seeing that the filter is reusable there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.
Straight Forward Installation. PMAS designed their Velocity Cold Air Intake kit to easily install in under an hour. Installation can be completed with just basic hand tools, no extra modifications or special tools are required. All necessary hardware and instructions are included.
Application. This PMAS Velocity Cold Air Intake System is specifically designed to fit the 2015-2017 GT Mustangs equipped with the 5.0L Coyote V8 engine and requires re-tuning of the vehicles computer for operation.
Technical Note. This product is not legal for use in California or any other state adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.
Calibration Required. Installation of this PMAS Velocity Cold Air Intake will require the use of a Handheld Tuner to reprogram the vehicles computer (ECU) for operation. By reprogramming your Mustangs ECU you will be able to realize the full power potential that this Cold Air Intake has to offer.
Unique Design. Designed with maximum flow as the first priority, this PMAS Velocity Air Intake was engineered with computational fluid dynamic “CFD” data for minimum restrictions. Featuring a patented mass air flow sensing system, this Cold Air Intake effectively uses a massive 120mm intake tube with no MAF resolution loss. The unique Velocity Stack inlet design maximizes airflow without turbulence for smooth, stable idle air flow which results in stock drivability.
Reusable S&B Air Filter. The included high flow S&B Filter effectively filters out power robbing contaminants with its multi layer design. S&B Air Filters are made up of eight layers of specially treated cotton media that are mounted between two epoxy-coated wire screens. The red oil used to treat the cotton layers creates a sticky surface to capture harmful microscopic particles before they can enter your Mustang's engine. Seeing that the filter is reusable there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.
Straight Forward Installation. PMAS designed their Velocity Cold Air Intake kit to easily install in under an hour. Installation can be completed with just basic hand tools, no extra modifications or special tools are required. All necessary hardware and instructions are included.
Application. This PMAS Velocity Cold Air Intake System is specifically designed to fit the 2015-2017 GT Mustangs equipped with the 5.0L Coyote V8 engine and requires re-tuning of the vehicles computer for operation.
Technical Note. This product is not legal for use in California or any other state adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.
Fitment: 201520162017 Details
PMAS N-MT13-1
CA Residents: 
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov